🛁 Restore your tub’s glow—because your bathroom deserves the best!
The Ankita Tub Repair Kit is a versatile, waterproof paste designed to permanently fix chips, cracks, scratches, rust, and holes on tubs, sinks, and showers made from porcelain, fiberglass, acrylic, enamel, and resin. Featuring a fast-curing, high-viscosity formula, it delivers a durable, non-yellowing, heat-resistant finish that’s easy to apply without professional experience. Compact and modern, this kit ensures your bathroom surfaces look flawless and last longer.
Material | Porcelain, Epoxy, Fiberglass, Resin, Enamel, Acrylic |
Brand | Ankita |
Style | Modern |
Item Weight | 0.18 Kilograms |
Item dimensions L x W x H | 2.4 x 5.47 x 2.63 inches |
Compatible Material | Porcelain, Fiberglass, Enamel, Plastic, Acrylic |
Water Resistance Level | Waterproof |
Item Form | Paste |
Unit Count | 1.0 Count |
Number of Items | 1 |
Color | No.01 White |
Surface Recommendation | Tub, Sink, Tile |
Manufacturer | Ankita |
Item Weight | 6.4 ounces |
Product Dimensions | 2.4 x 5.47 x 2.63 inches |
Batteries Included? | No |
Batteries Required? | No |
V**S
In expensive+Easy to Use+Profesional Results
My tub had a hairline crack in the bottom. This product was so easy to use and 24 hours later- The repair was complete and looked great. It appears to be stable and a permanant fix.
R**R
Works as described to fill screw holes left after removing doors from shower enclosure.
This product worked just as described to fill several small screw holes (from a sliding door which was removed) in a fiberglass shower enclosure. It was fast and easy to do and sanding was easy. The only advice I would add is to be aware that there are many shades of white and that the “white” of this product may not be a “perfect” match to every “white” fiberglass shower/tub enclosure. It is not hugely noticeable because the screw holes are very small, so I am happy with the results. But if you were patching a larger hole or crack, you may want to check the color before you commit.
D**H
Works ok.
We had just purchased a new tub enclosure but had a bold go through the back of it when we strapped it to the trailer.Bought this to patch it up.I used a dremel tool to grind out the old, flaking acrylic at the hole, then used this to fill it in. The color was a very close match to the white tub, however it was a bit difficult to spread. It kept wanting to run and took a long time to dry (like over an hour before I could touch it without messing it up). I ended up doing it over the course of two different days. One to just to an initial fill. Hard to get it smooth when it kept running on me. After the initial one, I could see the fiberglass backing through it still, so I did a second coat a few days later. I mixed up the second coat and waited a while before applying it, and it didn't run that time. Still hard to get it to spread evenly with the little spatula thing.The tape they provided was nearly the same color, but just a little off-white, which made it difficult to see where the tape was without having a bright light. It was also messy, since I had to keep working it with the small spatula until it dried enough to stop running.Overall, it did work and the hole was filled. The hole is barely noticeable, but the finish isn't as smooth as I would have liked.
A**R
Perfect function
Works better than expected. Dried, sealed and adhered perfectly if you follow the instructions.
C**B
Does a great job of filling in chips and cracks
Owning an older house and being "a bit particular" can quite often present a challenge. After moving in we noticed there was a small chip in the wall of the bathtub, and a similar sized chip in the toilet bowl in the master bathroom. Loath to replace either, I stumbled across this kit. I've been aware of two part epoxy for some time, but this kit makes it very easy, with simple to follow instructions.Over the course of an afternoon I was able to patch both the tub and the toilet bowl and the finish on both although noticeable is smooth and clean. Both needed two applications (mix, fill, sand / polish) as the hardened resin sank. The instructions do make note of this. The end result is waterproof and overall I'm happy with it.I'm not confident that this would do as good of a job on a larger hole or crack, but since I didn't have need (and hopefully never will) for that type of repair I won't comment further. There's certainly plenty left over after doing my repairs.The color is stark white, and I do wish I'd mixed a little paint or something in to match the color of the older tub as it does draw the eye a little, but overall a very solid product.
B**H
Works well
Worked really well for tub crack going up the side and on the bottom.
S**7
Great for filling in cracks in tubs and sinks.
This is great for filling in scratches; easy to use; squeeze only what you need; comes in white but can add paint (I used paint for kids to change the color). Probably works very well on a tub or sink with a crack. Dries fast but instruction states over nite. Would buy again.
J**N
Large coverage and great color.
Easy to use and the instructions were easy to follow. The color matched my tub perfectly. If your tub has a dippled textured, you may need to sand it flat for adhesion. Besides the material is going to smooth it anyway. It can cover a very large area. maybe about two foot long.
Trustpilot
3 weeks ago
1 month ago