PawHut69" Large Wooden Hexagonal Outdoor Aviary Flight Bird Cage with Covered Roof, Brown

2025 - Update 2Just purchased my 2nd one. Moving to a 2 story & wanted one upstairs & downstairs. The 1st one is 3 years in & still looks amazing. This has survived the NorthWest rain, snow & wind.Original Review below…I hate long reviews, so here’s the Quick Cap with details after.KNOW what you’re getting into.At this price point, protect the wood before you put it together.There are pet safe stains & water proofing.I waterproofed every single piece as it will be outside.The roof is the hardest. Find your angle before you even try to screw it together. I did this by blocking it AND using a center object the panels could rest on.I also added roofing paper to prevent leaks.There was zero difficulty with the panels until connecting the two sections of 3 which just required an extra pair of hands to keep the angle correct.I built screen frames for every wire section of the panels to keep the bugs out.Yes, the Lock is inadequate & the doors didn’t line up but those are easy fixes.For the cost, this will be a GREAT secure outdoor house for my Cats to enter from a window.DETAILS:I painted the roof Black.I did not put the Roof together as instructed. I blocked it with bricks on the outside. That wasn’t enough & I needed something in the center to rest the panels on as we adjusted it like a puzzle to find the angle. I used an upside down small trash can & then a stack of paper plates & bowls to accommodate the height.It took a bit of back & forth adjusting to close the seams as much as possible.Once I found the angle, I removed one panel & used the topper that comes with it to suspend the height & screwed what I could reach 1st.At the end for the last 2, I turned it over like the instructions show.Some screws just spun. I did end up buying a larger diameter screw for those but also added some ahead & below to pull the roof sections tight.I stapled roofing paper overlapping to prevent leaks when raining.I’m using this for Cats, so I built screen frames(miter saw, 45 degree angles) to keep out the spiders, carpenter ants, mosquitoes, bees, wasps & whatever else can fit through the wire.Measure for each if you do this because it varies on each panel.I still have a deck to build for it, a floor & Cat climbing fun.For those who want this for a Parrot large enough to bite through the wire, I recommend PlexiGlass panels over the wire on the inside but they will still likely chew on the wood if bored.Building a Hexagon Deck for it as well :) UPDATE : added pic of the Deck

This is overall a great cage but you have to be careful putting it together and lifting the top onto it. You may also want to buy sturdier wiring/screen for it because it's DEFINATELY not strong enough to put toys or perches on. If you have large birds I don't recommend this cage AT ALL!! I use it for my budgies and my green cheek. But I don't think it's sturdy enough for anything larger, unless you reinforce it to accommodate them.

Materials were flimsy, and angles sloppy so pieces didn’t fit together well. Screen popped out of one wall, latch didn’t work because of gap between door halves and weak structure. Screws furnished were too short to hold firmly. Had to buy extra hardware locally to reinforce the structure, for door latch, etc. Accompanying booklet had unhelpful drawings but no written instructions, essentially leaving purchasers to figure it out for themselves.

It's well made easy to assemble ,took me about an hour with one more person, I would not put anything larger than a conure in there African grays and up will be able to chew this up very easily. IT IS OPEN FLOOR , I used a astronturf mat as flooring.I'll be putting my Indian ringnecks, green cheek and blue crown Conuers and Quakers in this.Very pleased with this purchase

Way smaller than pics look. I have to bend over to get inside with both doors open! Easy for birds to escape. Love the look but need to upgrading all the parts as there are small holes that finches can get through, not very waterproof nor predator proof. Very cheaply made. Be prepared as others have stated that you will need to make some big changes to correct those issues. Bad directions. Very hard to assemble roof. Giving this to a bird rescue group and buying a metal walkin aviary that will last forever and not have these issues from the getgo. Lesson learned.

This aviary is not very sturdy at all. It is made from extremely soft wood that a small parrot could destroy in a short period of time. The galvanized metal mesh is also very flimsy and when you try to put a different kind of perch on it the perch just kind of hangs there instead of sticking out like it's supposed to. At $329 it is way overpriced for the quality. I purchased mine last year and I've only put my cockatoo in it twice because he can chew right through it. It was such a waste of money. I don't recommend this for birds or anything that can chew wood at all.

I thought this was a great start for what I wanted. My wife wanted an outdoor aviary for her babies. I like the design and for the money and time it just made sense. I did "over engineer " a little but building a base so it was a little bit higher and heavier for wind resistance. I built a floor and a front access so I could occasionally rinse it through. The only fault I have found is the mesh. Parrots used their beak to climb so the mesh appears galvanized which can be hazardous so I am replacing with stainless mesh.

This cage is a little difficult to put together because the wood is so soft. Every time I moved a piece the screws would pop out. I modified mine as soon as I figured that out, and it was much easier to put together and turned out just fine. I used heavy duty Velcro pieces between each screen panel. I also used 3 sturdy zip ties and trimmed the ends. It is sturdy and I Won’t have to worry about screws, popping out in the future. It looks very nice. The top settles nicely on the top although I would put it in an area where you won’t worry have to worry about wind. The last thing I did was add a magnetic Latch to the top for a more secure door. It’s a nice flight cage and I know my budgies will enjoy spreading their wings <3