EUHOMY Commercial Ice Maker Machine, 100lbs/24H Stainless Steel Under Counter ice Machine with 33lbs Ice Storage Capacity, Freestanding Ice Maker.

First off i would say this product is a Great Value and I 100% recommend it. The company is awesome to work with. The price went down a couple days after i bought ours...They gladly refunded us the difference when i sent them a message.I fish all summer and constantly need ice. After Costco hiked the ice prices by 250% i started shopping used commercial machines on craigslist. I decided to give this a shot before i spent $2k on a beat up old restaurant machine....I'm glad i did. This machine is compact, light weight, easy to set up. Could easily be brought on a camping trip or to a hotel (If they dont have ice). I bought the $40 in-line filter and spend another $20 to Tee into the connection of my wash sink. So far So good.Here are a couple considerations i would have found helpful going in;1. It makes ice faster than i anticipated. Awesome!2. It does need some significant drainage. I roto-hammered a 3/4" hole through my garage slab because i know i have 25 yards of drain rock under it. Whiskey Tango move but it works.3. ***I think the only "Con" to this Item*** I weighed the 3 -"Ten pound" bags of ice i get out of the bin (when it shuts off) and they are between 7-8# each.**********When you wake up you will have ~25# of ice to use***********I've even broken the ice up in the bin as it comes out and it only gets another 1-2# yield.With the machine unplugged i bet you can fit 33# in it but it doesn't make and store 33#.We fill bags with ice whenever we can. We store them in a freezer. I have no doubt the machine will make 100#+ in a 24 hour cycle. But If you need the bin capacity I would consider buying the next one up.

I’ve had my Euhomy ice machine for 6 months now and I love it. This machine replaced a previous ice machine in my home bar where I already had the water supply and drain in place. The Euhomy’s included water supply line seemed cheap and flimsy so I bought an adapter at Lowe’s and upgraded to a stainless braided hose. You WILL need a drain! This machine generates ice fairly quickly but its storage bin is not a freezer and therefore melts over time (speed depends on your environment). Without a drain your bin will turn into a swimming pool as the ice melts. The drain is gravity fed so your drain system must be BELOW the Euhomy’s drain line (located just a few inches above the bottom of the machine) or you can purchase and install a small drain pump to push the water upward to a sink drain pipe. I built a short riser for my machine to sit on, raising it and subsequently its drain outlet 4 inches higher allowing it to align with my existing wall drain system.If I run the machine continuously, it will cut itself off when filled with ice (fresh batch every 10-15 min.) Then it will turn itself back on as needed to replace any melting ice and keep itself full. If I know I won’t need ice for a few days and manually turn it off, all the ice will have melted within about 12 hours (machine is located inside my home with the A/C set around 75).Some reviewers have complained about ice being melty or wet, and melting very quickly. There is a simple menu screen adjustment on the front for how “hard” you want the ice cubes to be (read the instructions because the hardness setting numbering system didn’t seem obvious to me). Even on the hardest setting, the ice does seem to melt in my drink faster than ice from my freezer. But for me it’s not a problem. Again, this is not a freezer so there is no way to keep the ice super cold after it drops into the bin.Some reviews complain that when the cubes drop they don’t break apart but rather stay together in sheets. What I’ve found is that when I set it to freeze “hard”, the fist batches that drop all the way to the bin’s floor will break apart. But as the ice piles up and fills the bin, the newest batches only fall a few inches inches landing on top of the pile and don’t usually break apart. But I keep a stainless kitchen meat mallet in the bar and a few light taps on the pile of ice and they easily break apart.I read at least one review that claimed the machine he received wasn’t stainless and was in fact ugly white plastic. All I can say is mine came with a protective white plastic wrap that I had to peel off to reveal the stainless. My wife placed a magnetic hook on the front for the ice shovel. Now while I’m no scientist, it is my understanding that magnets won’t stick to stainless soooo… I’m not sure if it’s actually stainless steel but it IS metal and it LOOKS like stainless.It does make a little noise as some complain, but I hardly notice anymore and my bar is in the middle of the house just feet from my living room. Once it’s full, it only kicks on a few times through out day for about 10 min.Overall, it works perfectly for me. I paid $399 with free shipping and got it within a few days. It was packed very well and runs perfectly. (I did get an error code once but a quick power off and back on… no more trouble). Be ready to clean it every so often as you should any appliance. I would absolutely recommend this ice machine for any home as long as you understand that the ice bin is not a freezer (mediocre cooler at best).

The media could not be loaded. Hello I am from the Bahamas and i am an entrepreneur, I was interested in buying an ice machine because i sell beverages on the road, and stumbled across this product, based on the reviews. I was a bit skeptical at first because of the bad reviews so I asked a friend and also my dad what were their opinions, my dad told me to give it another week (decision making process) and my friend told me to get this. So I got this the following week, as was advised from my friend, as this was and probably still is number #1 top Commercial ice machine and a fast seller. The installation wasn't all too hard, despite me having no experience in plumbing nor electrical, it took back and forth trips to the hardware store and probably about $300 in labor and supplies which comprised of the electrical and plumbing work of course.After the installation was completed I gave it an additional 12 hours prior to starting it up to ensure the PVC glue cured well, hence the machine received more than 24 hours in an upright position as stated (advised) on the front facing. I started the machine the next day and allowed it to self-clean for 20 minutes before making the first batch of ice. Everything sounded normal, however during this phase i thought the machine encountered a problem due to the length of time it took to fill up with water (flashing arrow indicating machine is filling up) to my avail that eventually disappeared and the machine cleaning phase had completed and it went into ice making mode automatically. All i did was watch as the ice was being slowly made, i stepped out of the shed to do some other work around the house and came back to see what was the state of it, it was flashing "08 min" indicating 8 minutes left before the completion of the first batch of ice. The ice fell into the bin( a bit loudly), but i didn't mind all i wanted was ice. There it was my first (premature formed) batch of ice. After witnessing it dispense the first batch, i left it alone for 2-3 hours, coming back however i was shocked to see how little ice it had made.I then began to observe it more closely to discern exactly what could be causing it to make premature ice and not fill up. I noticed after every batch of ice that was made, the dispensing tube would wet the bin up (that the ice would drop in) and sort of defeat the purpose of what the machine was intended to do(make ice). Immediately i contacted customer support, and was advised to send videos accompanied with other information. Willow responded in about under a day, after all it was over the weekend so i had assumed company hours was offline at the time, fortunately i didn't had to wait until Monday for a response and got a message from Willow @ Euhomy customer support on sunday. Willow said the tube letting out the water above the ice trays was not positioned properly and if i would not mind to rotate the tube where the holes (nine of them) would point downwards. I did that (very easy to do) and started the machine again.WaLah ! :) Happy Boy, Ice was now maturely being produced and was not melting down after every completed cycle. I will upload pictures and a video. The machine has been running almost 7 days str8 so far it has encountered one (E2) error, but i think that was because the bin being full of ice held down the white flap for a while (presumably speaking). I am pleased that with this product and would advise other people to buy it as well, customer service is quite reputable. I wanted to upload the video of what it was doing prior to the fix but i could of only uploaded 1 video.~ Additional note: Makes a TON of ice ~Update: Excellent Customer Support, I'd recommend this product or any Euhomy product to anyone interested in ice machines(No wonder they are #1 in commercial ice machines ^_^), just based on their customer support reliability. ~SIX STARS ~