Corsair CC-9011070-WW Carbide Series Air 240 MicroATX and Mini-ITX PC Case (Black)

Quality of this case is tip notch. First time in my life I liked the finishing of a PC case. It's supports both Micro ATX and Mini ITX. The power button and reset button is very pleasuring to press . Trust me right after you unbox it, you will be pressing those buttons more than 5 times guaranteed. Hehehe. I don't know why people like light things, but I wished the case would have been heavier. Wish the panels would be thicker ( thick enough to take a punch). I will be assembling on it with MSI B450m Mortar MAX, Ryzen 5 3600, G-Skill trident z RGB 3200 mhz 2 x 8 gb, and MSI RX 570 8 gb OC. Wish me luck. Seller contacted me before shipping with which motherboard was I going to assemble ( as it supports only mATX and Mini ITX) . So I asked him to mentioned on the package that the parcel is fragile and should be handle with Care. And seller did exactly that. Package came fully intact which I didn't expect ( keeping in mind the distance it took to reach me- Bangalore to Shillong- 2913.7 km ). But I was surprised when I received it as it was undamaged. Thank you PC Solutions.Overall , would recommend anyone to buy this . Trust me after I received it , for the first 2 days I was only admiring the case

Superb cabinet, definitely an eye catcher with it's shape and size, the transparent side panel, which can be oriented as the top as well. You would definitely want to invest some more money and get some LED lights LED covers, and make sure the hardware inside is worthy of flaunting :)It is also designed brilliantly, the SMPS along with it's cables are in the other compartment, helps in managing all the things, and eliminates clutter. HDDs have a separate compartment, 3 each for both 3.5" and 2.5", makes it really easy to add or remove them. There are already 3 huge fans installed, and you can add a few more, no scope for circulation issues. The magnetic nets which you can remove helps in cleaning dust easily. You can fit really large GPUs and CPU cooler in it as well. Overall, it's a fantastic cabinet, and you cannoy go wrong with it.

The cable management is very good and most importantly keeps my motherboard cool with it's in-built fans. I have installed Asus z370i Mini ITX motherboard, Corsair PSU and WD 1tb HDD.Assembling was super simple. Thanks Corsair for engineering such a great design/built.

Great service and great product satisfied so far

great case for MATX. Just go for it.

Good quality cabinet look good, But Maximum you may give Rs 7000 for this

Overpriced.

Ok I love this case!Easy To build in, cable management is a breeze, keeps everything v.cool, with plenty of installation options and looks fantastic inside and out.I managed to get 5 120mm case fans (3 intaking and 2 exhausting) and a AI0 cpu cooler fan and rad into this micro atx case. I think this goes a long way to show you just how many options there are in this case. Because of all these fan placement options I can have 5 fans running at 30-40% extremely silently at idle and knock them up to 70% when things heat up and still manage to keep the volume very quiet. As opposed to having less fans, running faster and louder to achieve the same cooling properties, an option not easily avalible in a micro atx case.As other reviews have said, because of the twin compartment design, cable management is simple and tidy and once again there are plenty of options. With there being rubber grommets all over the place!The only problem I have is with the possible gpu's you can fit in there. Anything higher than 130mm high and you're going to have problems getting the clear panel on but that's not too major I guess.All in all, a very good case.

Great looking case, but surprised that the build quality wan't quite there considering the price, side panels very flimsy and thumb screws very cheap and one of them rusty.However, if you use this case with the window facing up the case vibrates, at first i thought the noise was the psu, so swapped psu's and still there, eventually realised it was the case. The noise from the vibration is odd but intolerable, so had to switch to window on the side, luckily i hadn't attached the rubber feet.All in all though iv'e kept the case because it looks good and fits perfectly where i want it, but its a £50 case tops, not worth £85.edit - vibration noise is still there no matter which way round i put the case, in the end no good, going to have to buy another case. waste of money and frustrating.

Make sure you check compatibility and measurements of everything you want to put into this case before purchasing, as my first build I could make sure everything was fine. I love the Micro size cube design and also one of the few quality Matx cases I could find in White.The dual chamber design is a godsend for cable management, can shove all the cables in the right hand portion of the case and not have to worry about any of it as you cant see it. Airflow is excellent due to the large grills and the fact that the GPU is very close to the bottom of the case so it can take in fresh air from the outside below, but this does mean it will be slightly louder than other cases.Materials are much better than I was expecting after reading other reviews, a lot of people say the panels are plastic which is simply not true at all. One Gripe I do have is that I had to remove the 3.5 inch hard drive bays as there was not enough space for all my cables otherwise, but this was my own choice as I used sleeved extension cables which took up a lot of room.

Personally I despise massive ATX cases; and its also really hard to fine simple and elegant ones as well.This case is pure wizardry for me. Unlike similar things of its size, it can fit a Micro-ATX board. It can set in several orientations if you desire, and has a nice window. It is reasonably solid, and has good airflow. It also has a hidden reserve area for cable management and HDD storage.The only thing to look out for... and this nearly hit me; is vertical space for your Graphics card. The power cable for my GFX presses up against the glass!

This is the second case I have bought from Corsair. Like the last, I bought this case for it's approach to cable management, the glass side and the fact it looks like a small microwave.This case is extremely easy to complete a build in, mostly due to it's vast inner space.I have two issues with this product however. The first is that the outside of this case feels and is very plasticy. This means that it is prone to scratches and I would recommend sticking the feet on this case almost as soon as you get it. The second issue I have is that one of the front facing case fans is extremely noisy. It's as if the bearing has already gone.The item was delivered the next day.