MOOG K80276 Alignment Caster / Camber Kit for Nissan Frontier

they do the job, nothing big is just a set of bolts.

Bought generic ones off eBay when I bought my lift/leveling kit for my 2011 Nissan Frontier and being cheap didn't workout. Guy at my tire shop recommended these to get a better alignment. These came in 2 days, these are MUCH better quality, took an hour or so to swap out, alignment done and the front tires now look align and the numbers on the alignment read out are WAY better. If you are are doing a front lift/leveling kit these are the bolts! You will need two kits, one for each side.

Ended up being very easy to install and solved the problem, after watching a YouTube video on how to install these. The shop wanted $400 to do it and would not align my 4wd frontier without changing these bolts. I removed the rear sets first and then the front ones, it is easier to keep the control arms aligned, so that you can drive it with out causing any damage and then get it to the shop for the alignment.

The bolt, washers and nut was packaged nicely. It seems to be of good quality. The only issue I see is that the nut does not thread on fully to the bolt. I bought two kits and all four nuts did the same. I do not know if it is by design. Gonna see if I can re-thread them to go on the bolt nicely.

These bolts fit well and did the job! Excellent price too!

Used these in conjunction with a 3" lift on a 2005 xterra and they worked great. Word of advice don't take shortcuts and take the wheels off. I fought the first one leaving the wheels on. Once I took them off and relieved the weight the remaining three went in with no issues.

Bolts too big to fit frontier.

Used on a 2008 Nissan Titan. I only got them because they were quicker to get than the oem bolts. I cleaned the inside and outside of the mounting plates on the truck. I applied anti seize to the outside of the mounts where the oblong washers will slide against the steel during adjustment. Being in the rust belt this was a necessity to ensure future adjustment and to take strain off it during adjustment. I would not apply anti seize to the inside of the mounts since that could possibly result in the inner steel tube of the bushing slipping durring rotation. That's my guess anyway. Also make sure the inside of the frame mounts are reasonably clean. I've read that dirt and rust can cause squeaking if it gets jammed in there. I just hit mine with a electric drill using a wire wheel.

Quedaron super bien! y Muy rapida la entrega.

Cambolts are perfect replacement for pathfinder 2012 r51 after 2" lift for camber and caster adjustment, very well made product👍

Great price and perfect

just what was needed to replace worn camber bolts

Arrived way faster then expected and is exactly how they listed.