Duronic Monitor Arm Single DM351X3 BK Height Adjustable Desk Mount for 13–27" Screens, VESA 75/100, 10kg Load – Monitor Riser Clamp for Home Office, Work, Gaming

Ordered this monitor stand to use with an Acer G246HLBBID 24-inch MonitorAcer G246HLBBID 24-inch Monitor 16:9 FHD 2 ms 100M:1 A 250 nits LED Acer EcoDisplay. It requires some assembling, but the instructions were clear enough and it was supplied with a range of screws of different lengths and thicknesses to fit a variety of screw holes in the back of your monitor to enable you to attach the VESA 75x75 / 100x100 enabled bracket. The stand seems more than able to hold the weight of my monitor. The stand is height adjustable and you can tilt the screen slightly both side to side and up and down. The neck of the bracket is not a long one, so there is some adjustment to move the screen further away or closer to your face, but this suited me as I didn't want the screen too far forward from the back of my desk. In work, it has made a real difference to both the space available to me on my desk as the monitor is now off my desk and to my back, which is considerably more comfortable now the angle I an looking at my monitor is more appropriate. The Acer monitor is great, but the stand supplied with the monitor a bit to short for me personally. I consider this stand a good quality product and very good value for money.

I opted for two of the DM351X3 model (as apposed to the duel DM352 version) due to the size of my monitors (27" BenQ) and the need to position them in a varied combination of landscape and portrait modes. Each desk mount was packaged very well with provided hex/Allen key and a variety of screws for the VESA mount. The addition of a sticky rubber pad for the clamp is a welcome addition and provides some welcome protection to the underside surface that you're securing the mount to.Both the 3 point arm and support pole are exceptionally strong and durable with zero bend or movement when handling such a large monitor. The cable clips help to keep everything tidy whilst the inclusion of the Duronic logo at the base of the support pole makes this desk mount look even more premium - definitely worth the £20 price tag. There are a few marginal blemishes/bubbles/bumps on the base clamp that I only noticed when taking the photos for this review - ultimately they are barely noticeably to the naked eye (due to the DM351X3 being black in color) and don't visibly detract from the visual quality of this product whatsoever!There are only two minor negatives to this product (and this is me just nitpicking);1) horizontal and tilt positioning is excellent however to alter the height of the monitor attached you physically have to release the appropriate clamp and carefully move the 3 point arm up and down the pole support - if you're planning on changing the height of your monitors on a regular basis this could be a little annoying.2) positioning the height of each arm (when you have 2 or more) at exactly the same height is rather tricky - the addition of some line markers/notches down one edge of the main support pole would be beneficial.At £20 you can't go wrong- these are an absolute bargain and have a truly premium feel to them!

It arrived within two days, and took no more than about 5 mins to install.Duronics really have put some design effort into this. Even the packaging's been thought through. The arm and mount are kept apart within the box, presumably so that they don't mark each other in transit.It comes with a selection of screws and spacers to accommodate most monitors and, with the monitor mounted, the screen is absolutely solid while still allowing you to adjust the horizontal and vertical tilt by hand. Although it comes with a height-setting clamp, the arm alone can be held tentatively in place by twisting a thumbscrew at the rear of the base of the arm (the bit that slides up/down the vertical mount), thereby allowing you to move the monitor up and down with greater freedom. Of course, if you move the monitor arm left and right, the arm gradually will slide down. More likely, you'll fit the supplied clamp, set the arm to the required height, then lift the clamp up to meet it. Even the clamp has a neat design; the mini-lever that does the tightening is like a sprung ring-spanner. It can be pulled out slightly so that it can be moved to a more suitable position on the nut so that it doesn't get in the way of the arm. It's a quality item all over, and I bought another immediately. Of course, the benefit of having two single-monitor mounts rather than a single dual-monitor mount is that you can adjust the monitor positions independently, and I should imagine the monitor stability would be greater due to the shorter arm.Worth mentioning that the VESA plate didn't fit into the recess on my primary screen, and the supplied spacers were approx 4 mm too short for the extra-length screws, so I had to extend the spacers with some washers of my own.Best 40-odd quid (for the pair) I've spent in a while, and nice to get rid of the space-occupying dust-collecting bases.The box contains also a piece of sticky-back rubber that you can attach to the inner face of the desk clamp, presumably for better friction, but I've not used it. Also included is a pack of three strips of velcro for arm cable management.Suddenly, my cluttered 'computer desk' has become a spacious writing desk with two monitors floating exactly where I want them to be.Thanks Duronics. Should have bought these years ago.