Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing (Navy Grey, 1kg)

This resing gives great results i have used the gray and switched to navy gray as it shows the hilights and shadows better when selling items. Can not fault this at all. Every time I think I will use a cheaper brand I regret it instantly. Great results on mono x 6k at 2sec per layer. There is a mild smell but it is no where near as bad as the cheaper resins. Its tough once cured and if you printing minis I would recommend getting the tenacious and mixing in 100ml or 10% into the fast to get a bit more elasticity part so if the mini is dropped little parts won't shatter. The only down side is cant find the 10l bottles in the UK

Easy to use and fumes not particularly noticeable. Prints are crisp and sturdy. Great product

Is a nice resin to work with, I used it for printing D&D miniatures and although it does have a lot more movement in things like swords it's still brittle enough that one drop will most likely result in a broken print. At the price it's probably more worth mixing this with a cheaper resin but don't get this thinking your prints will be a lot stronger.

First resin I've used. Comes out somewhat sticky but from what I've heard that's normal. No idea on the paintability yet. Prints fine details well, but many can be very very delicate. Doesn't smell too bad, either.

Only use resin for 3D printing if you know what you are doing - the health considerations are critical and I never go near my printer without gloves, mask and most important of all eye goggles. I also read all the manufacturers instructions. But if you are going to 3D printing and want strong well formed prints then this is the resin to use. It has a Bakelite feel to the cured print, less flexible than PLA like resins but very strong. That said - take all the precautions I mentioned above and follow all the manufacturer recommendations - 3D printing has to be taken seriously - or you will hurt yourself.

Prints reliably, takes paint well, exposure is faster than others I've tried and it has less odour. I'll stick with this from now on.

I have been printing dice masters with this.. Using anycubic and elegoo resin I had nothing but issues with the dice, from elongated dice to twisted ones.. With this I have had perfect results. Yes it is more expensive, but for critical things it is fantastic. Still using anycubic resin for less important stuff but this is awesome.

Needs a little love, but is by far the best resin on the market at the moment.

i have a elegoo saturn and this worked very well i have had no fails using this (apart from my own packing this in to fill the build plate and supports getting stuck to other models). it barely makes a pulling noise from the fep and works fine at 28c (ive had it up to 33c in the vat with no problem) temperature as i live in Aussie and well its warm here. The detail and pigment is on point (4k screen 0.50 layer height no anti a ) and am happy with the results ill be trying in on a mono x and a 4k mini soon to see the differences in res and machines Cons ..... if you drop minis from bench (900mm) height onto tiles it will shatter (ive busted a few small minis like this ) compared to some others its a bit smelly ( i didn't think so until i had used a bunch of other resins) but still not to bad. a bit more expensive than other resins, but hey i only did one tank clean while using this stuff compared to eco and craftsman where eco was after every print (always had at least one fail) and craftsman with the occasional fail , so in that regard maybe not so expensive. these prints were done with - burnin layers 4 exp time 30 trans 0 light off 0 lift 12 speed 40 normal layer 0.05 light off 0 Exp 3 lift dis 7 150/150 lift -retract speed

Me ha sorprendido mucho para bien. En primer lugar, las dos resinas Siraya fast que he probado, huelen mucho menos que otras que he tenido. En cuanto a resistencia/tenacidad, no he hecho pruebas, pero en mi caso no es lo que busco. El acabado de la pieza, mate, en ese gris marino, y el nivel de detalle y resolución, son espectaculares. La figura está impresa con una Elegoo Mars 3 pro (4k) y estoy muy satisfecho con el resultado. Recomiendo 100%.

In mijn ervaring zeer goede details, supports failen minder dan met andere merken die ik al gebruikt heb, en het voelt steviger aand omdat hij iets leer flexibel en dus minder broos is dan sommige andere merken

Quite a forgiving resin with good detail. However, the result is more brittle than Fast Grey. Fast delivery and well packed.

Nice tensile strength and a pretty smooth print process