Linkstyle 4PCS 12V LED Interior Light Bar, 192LEDs 12V LED Light Strip with Switch, 6500K Slim Car Interior Lights for Car Truck RV Boat Cabinet

These lights did exactly what I needed them to do... shine the inside of my 7x16' enclosed trailer. I tied in the lights with one of the existing interior lights that were already inside of the trailer. The red wire from the light switch is the positive and the black is the ground. I grounded them right to the crossmembers for the roof with self tapping screws, so that also means I had to add eyelet connectors to the end of the wiring (no big deal). All in all, these lights are pretty dang bright for the money and you can't go wrong. I will update down the road, but I don't see why they wouldn't hold up since they aren't used daily. Probably once a month to haul a few ATVs around to camp.

I was about to write a bad review for 3 out of 4 bars burning out when I checked my power supply and realized it's a 24V instead of a 12V like I thought. They're nice and bright and come with 3 different mounting options. The leads are only a few inches long but that's not a big deal. They last about 30 minutes if you give them double the rated voltage.

Bought to replace two interior dome lights for my enclosed trailer. Worked very well and was happy with completed project.Installation included three options, double sided tape, metal brackets that clip onto the light bar and magnets. I did not use the magnets fearing they wouldn’t hold up to the rough ride of a trailer (plus one magnet was missing the magnetic part). I thought about using the metal brackets but the screw provided was tiny and had minimal about of thread to hold so figured that would strip easily. Instead of looking for a replacement screw I decided to give the double sided tape a try.The tape held extremely well to the plastic end of the light and the wood ceiling I adhered it to in the trailer. The lights are so light weight that I’m not concerned about them falling but we’ll see if they withstand the test of time. If not I saved the brackets just in case.Installed between and perpendicular to the cross members of the trailer. As you can see the lights were plenty bright to cover the whole trailer, I used all 4 for the 14ft trailer.

I'm using them to light my barn with 12v solar and they work great. The feature I like most is the mount brackets are magnetic. So I mounted them on Simpson tie brackets so if I need to move them at some point I just move the bracket, also I stuck one on a garage door rail. The only negative is the mount holes on the ends are worthless as the switch and wires interfere with the mount screw hole but the clip on brackets make up for that problem.

I installed 4 of these into my 32' enclosed trailer. I wired them so that I can either use my truck or a 20v dewalt battery to power them. So far they are working great. (Installed 1-26-2022) I will update this if I have any issues. The 1st photo is the factory trailer light, 2nd is only the 4 new lights and 3rd is both together. These are spaced about every 6'. The mounting brackets could be a little more solid but so far they are working great. I have a 750 mile trip in a few weeks so we will see how they hold up. Overall I am very satisfied so far.

Having a reliable light in the head's sink area has made all the difference in the world! There is an on/off switch built into the light bar already, but it is cheap plastic, so I put a toggle switch in the circuit anyway (on the left). Bear in mind that is light bar must be mounted to something or you'll have to glue the end caps on.

made of aluminum so using simple magnets won't work unless you glue the magnets to the back. That is the tricky part. It comes with clip on magnets that are pretty poor quality. Installed in my sand blast cabinet and 3 give enough light for my small cabinet. Add more if you need them. Mounting screws would not work here but may work great for your project

Provides great light as a replacement for fluorescent lights in motorhome. Easy to install with screws, brackets or tape. Purchased 6 packages, 24 lamps. Two lamps were defective, one total short, one a section of leds not on. Hassle trying for replacement since package contains four and only two were defective. Finally accepted Amazon account credit.

Not bad for the price. Size wasn't given in the description, but each strip is approx 34 cms long. One strip consumes around 3.6 watts on a 12 volt supply. I have put all four above my garage workbench, and they give an adequate but not perfect, white light, so they are quite economical. The switches are very small, and I haven't used them at all.

Good but x1 light doesn’t work

Lots of light used 1 in each stable

Lights were handy installed and work great for 2 weeks, one is out already, probably only a matter of time before the other 3 go.

I must have a faulty unit however the other 3 work great so reluctant to return