TORQUE Airbag Air Bag Suspension Kit for 1999-2004 Ford F250 F350 and 2008-2010 Ford F250 F350 2WD 4WD F-250 F-350 Super Duty Rear Helper Bag 5000 lbs (Replaces Firestone Ride Rite 2550) (TR2550)

Happy to see these fit around my gooseneck hitch without modification of the hitch. However did not fit my 2000 F250 without slight grinding. My bigger concern is how stable these will be compared to the previous air lift bags the truck had for 20+ years. These sit inside the frame, completely supported by 4 small bolts per side. The old air lift set outside the frame. Losing about 6 inches of width per side in the transition. The kit came with reasonable instructions, and more than enough air line to run to the back where I installed a T from the hardware store. Install took about 4 hours by myself with a hoist.

Honest and straightforward review. Bought this kit for my 2004 F250 SD 6.0l. I’d give it 3.5/5 stars.Kit itself: solid complete kit, all the brackets are pretty nice, hardware is good, bags feel pretty solid, airline and fittings are decent enough.Instructions: meh. At first glance they look like really good instructions (which may be direct fir for other trucks idk), but they’re only that till you actually go to install. Was more of just a general guide for my 04’.For my 04’, I did have to modify the lower bracket that bolts to the blocks/axle, I had to cut the ears off to get them to sit far enough over, as shown in some of the other pics on here. Did get a little funky with the hardware and upper bracket due to having a gooseneck bracket attached to my frame. The airline and quick connect fittings that came in the kit are meh, they do work but it took a couple times to get them to seal up.Overall, decent kit for the money. You’ll definitely have to use a little mechanical-minded thinking to make it work together, don’t just follow the instructions blindly. Would also recommend replacing and upgrading the airlines and fittings.

These were a pretty simple install... the only issues I had were removing a couple bolts but that's my trucks fault and one of the tire valve fittings that came with the kit leaked no big deal since i only needed one valve the way I set it up.. got rid of the squat with my 12klb camper hooked up still has 40psi after sitting a month so I'd highly recommend

Had all the parts needed for a relatively easy installation. No drilling required. No interference with the gooseneck supports.I’ve used them 4 times and these easily take up the squat my truck had with heavy loads.

Worked great for my 05 f250. Easy installation

Im happy with the kit but I did have to modify it like others stated. I have an 04 f250 and I had to cut two ears off the air bag brackets in order to get them to sit flat. The bracket that sits on the axle tube hits the rear shock bracket because the upper bracket won’t fit between the u bolts for the leaf springs. Easy fix, just cut off the ears and it will fit between the leaf springs and sit flat. Filled the air bags to 80 psi and let them sit over night, 12 hours plus. Only lost 10 psi. I’m happy with that. Recommend buying this kit.

The instructions aren't that great, at one point it says to line up some markings... there are no markings on the bracket or the airbag to lineup. When installing the airbags they doesn't line up with the axel. I know I can force it to fit. But I don't want all that pressure on the bolt going in to the airbag, and I don't need some sort of issue when towing. I contacted Torque they didn't have any information to offer me.Good price for a product that doesn't install right and is costing me money to return.

as shown