10” Inch J Pole Mount Accessory for Outside Antenna(Signal Booster Antenna, Yagi Antenna, Antenna Expansion kit, Dish, TV Antenna, Camera Pole, Weather Proof)

Excellent product! Made installation and aiming of exterior antenna MUCH easier.

I purchased this bracket to mount a weather station sensor module to my 2 3/8" diameter HAM radio antenna mast. I had to get a couple of 4'' host clamps to attach it, but it worked just fine. I am very happy with the quality of the mount.

I needed two people to install. Overall, the installation was fast, no major issues.I had to have my son hold it in place so I could tighten the clamps to hold it in place.It appears to be a solid pipe, it should hold up for many years.I would buy it again.

Item arrived promptly and undamaged. I purchased this item to mount a weather station to a 2 1/2 inch existing pole. The hose clamps that were provided were not long enough to accomplish this. Fortunately I had some longer ones on hand to replace the ones that came with the pole. One of the wingnuts was overly tight on the base. I had to use a pair of pliers to carefully loosen it as I didn't want to break off one of the wings. Once all of that was done, it was an easy setup. It leveled perfectly. I read a comment from another user that he could not level this for his weather station but that was not the case with the unit I received. Overall it seems fairly sturdy and had a good paint job.

I am using this to mount an outdoor weather station parallel to an existing vertical pole. This mount has mounting positions at 18 degree intervals but cannot be set at 0 or 90 degrees, because the dimpled location positions are not correctly punched in angle with respect to the mount to accomodate this. An easy tolerancing issue to fix, but obviously no one at the manufacturing end or the QA end cares.In typical cheap manufacturing manner, the four labels on it did not simply peal off, but had to be scraped off carefully and left a sticky residue. The residue did not remove with alcohol and attemting to do the same with acetone also remove the white paint.It would probably have cost nearly $0.01 to fix tall his in volume manufacturing, but does anyone in China care about the Bolton brand name?

Perfect as a side mount for a small antenna. Well built and easy to install.

The mount arrived just fine and seems fit-for-purpose. However it was missing the hose clamps and bolts to mount it to anything. I emailed the seller and got no response.

This is what you need if you are mounting an accessory antenna on a mast pole. This J-pole clamps to the mast with two stainless steel hose clamps; the plate in contact with the mast has a little saddle with steps to hold it securely in place. The J is adjustable to keep your antenna in the correct orientation (vertical or at an angle), with index bumps in the adjustment plate. I clamped a 1080 mHz ADS-B antenna to this mount to have it stand off from an aluminum mast that holds our weather station sensor package. Works like a charm and naturally the antenna now works properly. The construction is sturdy welded steel, with a heavy enameled coating protecting the metal. Considering many similar products sell at three times the price without offering any added value, I can heartily recommend this one.