EVIL ENERGY 16 Row Oil Cooler Kit, 10AN Transmission Engine Cooler British Radiator Universal Aluminium Black

Good packing super fast delivery

Installed on my LS swap to help cool my engine oil. Seems to work well.

No instalado aún, pero todos los elementos se ven de buena calidad. Saludos desde Rosario

Good replacement for what i needed. My 97’ saab 900 2.0 turbo definitely runs now thanks to this oil cooler.The “adapters” are thread tester you might be able to get away with using them as a fitting if it works in your scenario. Use them to find the proper size for the fitting and then find that proper male to male adapter. Tapered is a must in most cases for oil. Use plenty of liquid gasket And teflon tape specially if its not a perfect water tight fitThe reason i gave 3 stars is that the thread testers they sent aren’t even close to what they claim…The m20-1.5 is on the female end but is not on the male endThe 3/4-16 is 1/2in-16….I recommend figuring out the proper size -AN fittings. Or going to Ace hardware or Lowe's for brass fittings. DO NOT USE GALVANIZED STEEL ZINC FITTINGS. It reacts with the oil and will do funky things

Initially it all looked nice and worked. Within a few months the cooler itself had cracked at one of the fittings and leaked profusely. I replaced it with a better cooler and kept the lines. Within the year one of the hose ends was leaking heavily at the swivel of the elbow fitting, and one of the lines had worn through and burst leaking almost all the oil out of the car.Don’t bother with this junk, oil systems are important and deserve better quality parts that won’t fail and take out your motor.

This cooler definitely worked out well in a tight spot that fit perfectly! Highly recommend for all you guys with tight spaces. Quick and easy installation with all parts provided.

Similar in construction to a Setrab, but cheaper. Both financially and in its construction. Make sure you use the included o-rings to seal between the sandwich adapter and the lines to the cooler. The adapters are straight cut and don't seal on their threads. There's no brackets included, so you'll have to use some fabrication skills to mount it.

The media could not be loaded. I bought the 19” cooler.. easy peasy install. If u can change your own oil then u can do this.. find a custom way to mount your cooler and you’re good to go!!