Pentek 150576 3/4" #20 3G Blue Filter Housing with Bracket and Meter

• Standard filter housing for residential, commercial, and industrial applications.
• Reinforced polypropylene for strength and resistance.
• Holds a 20" x 2-1/2" sediment or carbon filter cartridge (sold separately).
• Pressure button for easier cartridge replacement.
• Initial pressure drop of 1 psi at a flow rate of 10 gpm.

This Pentek 150576 3/4" #20 3G blue filter housing with integrated ing bracket and pressure is suitable for residential, commercial, and industrial applications. The sump and cap are made of reinforced polypropylene for strength and resistance to s. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The cap has a meter for attaching a differential pressure gauge (sold separately). The housing can be used with a 20" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others. Specifications -------------- Filter cartridge size (H x W) (sold separately) 20 x 2-1/2 inches (508 x 63.5 mm) Initial pressure drop at 10 gpm 1 psi Maximum temperature 125 degrees F (51.7 degrees C) Maximum pressure 125 psi Maximum dimensions (H x W) 23-1/2 x 5-3/4 inches (597 x 146 mm) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, s, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted s, or substances that cause a change, such as neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted s, the maximum flow rate, and the a of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.