Toilet seat Anchor kit 84999 Replace for Kohler, fit Kohler Various one-Piece Toilets Toilet seat Installation Tool to The Bowl with Anchor nut and Screw

If you have a toilet where the seat bolts are hidden inside the body of the toilet. then you need this little kit in order to fix a loose or broken seat and you may not find that fact hidden in your manual or your manufacturer's web site (Koehler, I'm looking at you). I used this to change the seat on my Kohler toilet and it worked like a charm. The directions are clear and easy to follow. One of the fittings that go into the toilet body to accept the bolts was still firmly anchored, so I elected not to replace it, but the other one was very easy to replace. Once it was firmly set using the enclosed part and wrench, I was able to mount the seat (purchased separately) with the bolts in this kit and it was a perfect and solid fit.

The anchors are incredibly cheaply made. When I tightened the first anchor, with a ratchet as stated in the instructions, it immediately snapped off. It was a good thing I only needed one. The second I slowly tightened using a nut driver. After just a few turns I stopped because I was afraid of snapping it off too. It seemed tight enough and didn’t spin. I went to put the screw on, through the Kohler washer/toilet holder and the bolt was too short. I compared the size with the one I removed. The new one was half an inch shorter and would not work. I ended up using the tightening bolt (included). It looks different than what should be there (and with the existing one on the other side) but the toilet hinge cover covers it and it seems to work. Not a great kit.

Works like it should. This put the fasteners in my Kohler toilet. I do not like plastic fasteners for toilets. Kohler makes a great design that will not slip. Although you have to buy a fastener kit... :)

The directions were not clear as they even had a least one typo on them it doesn’t explain the difference between the setting bolt and the slotted machine screw. Kit was very expensive for what is included.

Worked great for one piece toilet to replace seat

The anchoring system works as expected. However, if the male-female end of the old anchor is at all oxidized due to moisture, the removal tool will cause the old anchor to break at its mushrooming section and the screw just spins. You will end up prying up the anchor with a flat bar. Make sure to protect the porcelain surface and use slow steady pressure.

I've changed 3 Kohler one piece toilet seats and have needed this every time because of stuck bolts or broken compression fittings. It's a PITA but better than buying a new toilet

The bolts work, but the tools don't. I gave this a low rating because the whole reason I bought it was for the tools. The tools don't stabilize the bolt at all. Also, the bolts feel kind of cheap.If you want to keep your toilet seat intact and are having trouble removing the original bolt, save yourself sometime and go straight for the hacksaw. After a lot of WD40, I was able to get the original bolt just high enough so I could cut it off with a hacksaw. I tried every option I found online and the hacksaw was the only one that worked for me.