13,000 BTU 12 Volt Low Profile Universal Auxiliary Cab Heater Car, UTV, Truck, Van

Fit in my John Deere just fine. Puts out plenty of heat. Found Dorman heat-riser tubing for directing the air flow. Mounting brackets could be a little heavier duty to prevent vibration but easy to fix. Maybe applications other than tractors wouldn’t even notice. Wish the fan was multi- speed but Amazon has speed switches.Added note: I had to change the thermostat to a 180* from a 160* to get higher coolant temperature and also had to bleed the lines to make sure there was coolant getting to the heater. This is standard for any installed heater as they all need to be installed correctly.

Great little heater, installed it in my 05 Polaris Ranger 700. Works as it should.

The heater is great for my old truck,My heating system in my truck was not repairable and part were not available. That unit works great .

Installed this in my 46' Chevy truck. This heater works great and heats the truck quickly. Came with every thing needed except the heater hose and fittings for the engine and water pump. I would definitely buy this again for my next car/truck project.

Returned this unit, not the best quality. Fan was very loud and vibrated. Sheet metal was poorly constructed and many screws were stripped.

This is a quality product. The case and vents are made of steel and the core is made with copper tubes and aluminum fins. Even OEM heater cores like the one I removed from my '88 Dodge D150 had cheaper made aluminum cores.Installation is a breeze, just drill a few holes and bolt it to the floor right in the middle of my truck. Finally, after freezing my ass off for years I've got heat again.If I ever decide I want to add air conditioning I'll give these same folks a call.

This works better than expected!! Keeps our Model A toasty warm. Highly recommend

The good: The heater works great. Puts out plenty of air movement with the fan. Mounted in a skid steer and will keep small cab toasty.The Bad: The Y fittings that come with it are NOT 5/8”od, they are 3/4. So I had to buy different ones. Also the mounting bracket is to long and hits the hose inlet so there is no adjustment. The kit doesn’t come with the bolts to bolt the bracket to the heater itself. So get ready to pick those up also.