Guide Gear Universal ATV Front and Rear Cargo Basket Set, Luggage Carrier Racks, Heavy-Duty Steel Mesh, 2 Piece

First off if you look around you can not find the same size for less than double this price. ONLY down side is the paint is not the greatest but not the worse at all. bracts worked good but i can see buy stainless steal u bolts down the road. I have suzuki 400 and the back basket hangs off in the worse spot. I ended up grinding off the lip on my quads rack to move it forward few inches. other wise only 2 bars on each side is holding all the weight. I and using for deer or other heavy projects. However, i think 40lbs would taco it. Front is perfect size and fit like a glove. I was worried since it was so cheap compared to all the others but in the end its worth it. I can see having them as long as I have the quad.

I have a 2012 Polaris Sportsman 500. These are claimed to be "universal", and after specifically asking the customer service rep at Guide Gear if they would fit my quad, they clearly do not! I took them out of the box and put them up where they should mount. The front rack is about 3 inches too narrow on both sides, and I would have to cut out a space because there is not enough clearance for the light. The rear rack would also have to be cut and modified because it covers about 6 inches of the seat. I am very disappointed that they don't fit because I like them. They do seem to be durable and well put together, just not for my machine... Now comes the hassle of returning them.

Good sturdy rack system. Poorly manufactured. I had to weld the mesh onto the one of the support posts on the rear rack because only two of the three support posts were welded. This caused the mesh to bow upward and would not lay down flat. The paint is very poor. Rusted the first night on my wheeler. I do recommend getting some good rustoleum paint and spraying the entire racks before installing them.The mounting bolts were way too long. I had to go buy shorter bolts. The bag holding the bolts was torn open and the bolts and nuts were loose inside the box when I opened it. Both racks were just in the box without anything keeping them from rubbing against each other and scratching them up. Poor packaging For the price and the little bit of work I had to do on them to get them up to par, it was worth it. I had to cut, modify and weld the rear rack so that it would fit properly, but I knew that before I purchased them so no big deal for me. I attached some photos so you can see what I did to make the rear rack fit and work on my quad.

Needed extra storage on the campground golf cart. I installed these directly behind the seat. The smaller basket up higher. Works great, half the price of a fold down seat and better storage.

If i could select 3.5 stars, I would. Pretty good for the money as you get front and back racks. All in all pretty well built, the coating is what is subpar. My ATV sits inside the shop and has never been in the rain since I installed them or even been in the woods yet. Coating is flaking off and there is rust all over both racks. The rust has run out of the tubes after I rinse off the ATV and is dripping all over the place. I guess I'll pull them back off and paint them with a quality paint and maybe a good bed liner type spray.You get what you pay for I guess.

I ordered this for my Kawasaki Prairie 300 and it works perfectly. A few reviewers have written that it is difficult to install. I found that the bolts are too long once it's tightened down but that the extra length makes it easy to install when reaching into tight places to thread the nuts in. I just cut the extra length off once the install was complete. I used a dremel with a small cut off wheel but could have just as easily used a samll hacksaw or even some larges cable cutters. Overall it only took about 30 minutes to install both racks and I never removed anything from my ATV in the process.They work well, hold a lot of gear and make using the ATV much easier when hauling gear for work or play. I highly recommend these for anyone looking for a nice set of ATV racks at a very affordable price.

The racks installed easy enough and are sturdy, but the rust all over the wheeler gets a thumbs down. I would plan on pre-painting these out of the box with a high quality rattle can product prior to install unless your atv is already a rust color in which case the rust running down the atv fenders wont show.

It is very durable and is pretty universal. it fit my 2000 honda rancher 350 perfectly.