- About this item.
- EASY AND SAFE INSTALLATION - innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2" clearance for install.
- HIGHLY RATED FOR MULTIPLE LOCATIONS - CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation. Tips: Customer should verify that fixture is wired properly and verify that the line voltage at the fixture is correct.
- EXTREMELY BRIGHT DIMMABLE LEDs use 13 watts to provide 1, 020 lumens with an 80 CRI, close to 80 lumens per watt. Dims down to 10% and compatible with select Lutron, Leviton, Synergy and Sensor Switch dimmers.
- ULTRA THIN LED design only requires a 6 inch ceiling hole and 2 inches of ceiling space are needed to fit LED wafer recessed light and UL recognized driver. SAVES MONEY AND TIME changing bulbs - Energy Star rating provides high light output with minimal power usage and will last 36, 000 hours or +16 years when on every day for 6 hours/day.
- Connect directly to 120V power supply via provided UL recognized driver.
- ›See more product details.
The Lithonia Lighting Wafer-Thin LED recessed downlight with
remote driver box combines high quality light output and
efficiency while eliminating the pot light housing for
competitive affordability. This innovative wafer slim Type IC
design allows easy installation for new construction or remodel
from below the ceiling without the requirement of a pot light
housing. Technical Specifications: Power: 13W Input Voltage: 120V
(Connects directly to power supply via provided UL recognized
driver) Luminous Flux: 1020LM Emitting Color: 3000K(Bright White)
Dimmable: Yes Light Source: LED CRI: 80 Surface Size: 6. 7 inches
Back Hole Size: 5. 9 inches Dimension: 6. 7 x 6. 7 x 1. 1 inches
Light direction: Downlight Average life: 36, 000 hours : 5 years
– Limited Electrical: Plenum rated cable connector to connect
from module to remote driver box. Isolated driver integrated
inside steel remote box with four 7/8" knockouts with slots for
pry-out Meets Highest Industry Standards: CSA certified in the
USA and Canada, Energy Star Rated, IC Rated, Wet Listed and Air
Tight More electrical information and complete list of compatible
dimmers are located on spec sheet How many LED lights do I need
for the room? Wafer 6 inch: One unit is needed for about every 2.
5sq feet in an 8 ft. ceiling room 3 units for a room ranging from
6sq ft. – 9 sq. ft. 4 units for a room ranging from 10sq ft. – 12
sq. ft. 6 units for a room ranging from 12sq ft. – 15 sq. ft. 9
units for a room ranging from 15sq ft. – 19 sq. ft. Which light
colors work for me? 3000K: Used in family homes, hotels, coffee
shops and other warm and sweet environments. 4000K: Used in homes
with a need of a soft white lighting atmosphere. 5000K: Used in
offices, working areas, shopping malls and other commercial areas
that needs super bright lighting Application Areas: Ideal for new
constructions, remodels or retrofit installations. Closets,
attics, hallways, bathrooms, kitchens, basements, soffits, entry
ways, porches, garages Stairwells, corridors, nursing/retirement
homes, condos, elevators, apartments, and any other small areas
Installation Guide: 1. Double check and measure the ceiling hole.
2. Open the cover of the remote driver box. Push and remove one
of the knockouts on the side plate. 3. Connect the remote driver
box to the light fixture and tighten nut connector. 4. Place
remote driver box through the cut-out hole. 5. Pull the spring
clip on the fixture up and through the ceiling hole. Place module
in the hole 6. Turn the power on Installation guide for kit
included in the package.