RAD SportzKayak Storage Rack - Two 73.25-in Freestanding Kayak Stands with Dual Arms and Adjustable Straps - Holds 2 Canoes, SUP, Paddleboards

Don’t let the negative reviews persuade your decision. Im using to store my OC-2 and OC-1. Excellent product and worth every penny. Sturdy, can easily carry its descriptive pounds of 100# each cradle. With the cost of lumber and time savings of building, it was worth it to me. Took about 1 hour to put together, but I took my time. Instructions aren’t the greatest, but it’s pretty straight forward if you can read instructions and look at pictures. Packaging was good, arrived in good condition. All pieces were intact and all holes aligned up to put all bolts through. Powered coated steel, orange color seems adequate and decent. Leveling foot pads are great for uneven surfaces. I wish Radz sports offered another option to add to this rack for a third cradle, maybe on the opposite side, however I could not find one. Being that these racks are independent, makes it easy for one person to move around, nice and light. My canoes are 21’ long and 24 ‘ long respectively. I’m going to purchase another one for my other OC-1’s. Would recommend & purchase again. Mine was sold by and shipped from Amazon.

We bought this to store two kayaks, a 14 foot Eddyline Equinox sit-inside and a 9 foot roto-molded sit-on-top. Both fit without issue, even considering that the roto-molded boat is quite wide at about 31 inches.Assembly took only about 20 minutes, with my grandson and I working together. As the support posts stand independently of one another, determining placement to support both boats was a snap. The fact that they're independent also means they're light and maneuverable enough that the stand can be easily moved to a new location by one person. There are adjustable rubber leveling feet, and also hardware to allow the supports to be bolted to a floor, if desired. The cradles for the boats can be assembled so as to be easily adjustable, using a pin-and-latch arrangement, or to be fixed in final position using bolts. Hardware is provided for either method. The cradles have fabric-wrapped pads to protect your boat from scrapes. Finally, there are two adjustable webbing straps that are attached to each cradle arm, and buckle around the boat's hull to keep each boat where it belongs.One very slight con was the instruction sheet. The illustrations could be improved for those who haven't got good skills with projects needing assembly, but even given that, it would be difficult to go wrong as most parts will only fit when assembled the proper way. Also, the instruction sheet referred to lock washers required for many of the bolts, but apparently the manufacturer has switched to using nylock nuts, making lock washers unnecessary (and therefore also not provided).Finish appears to be good, with the steel parts apparently powder-coated in orange and black. That's a good choice for finish for most areas. However, that means that one concern I have is the longevity of the product in our environment. We live mere yards from the ocean's edge, and the combination of salt air, moisture and hot, sunny weather here in Baja will certainly test the material choices. Intense sun's high UV attacks powder coatings (which are a form of plastic), and salt attacks the steel. But that's a minor quibble, and really not likely what the overall market for this product requires, and the material choices are certainly not unique to this manufacturer.And really, RAD Sportz deserves recognition for delivering this product at this price, as many manufacturers charge significantly more. About the only real material change that would answer our local environment would be the use of 304 or 316 stainless steel. It's anywhere from 3-5 times more expensive than the carbon steel used here. Many other manufacturers are charging 2-4 times more for similar products that are not advertised as, nor appear to be, significantly different, and are certainly not stainless steel. The price for this product from RAD Sportz is certainly competitive.A nice option for this rack would be a separately available extension post and cradle set allowing for storage of a third kayak or paddle board. Sadly, I don't see such an option on RAD Sportz's website, nor here on Amazon.I'm happy with my purchase, and expect many years of use from this rack.

This rack is awesome! We have 2 Shearwater 125 Vibe Kayaks (12’ 6” and 35” wide). It has more than enough space to accommodate both. Straps are a great addition along with the foam protectors on the arms.Cons: casters would make this perfect. Also, the assembly wasn’t too hard but a little annoying to set up.Overall…I’d buy this thing again…great buy!!!

Nice rack. I mean a really nice rack. It holds my Delta 15.5 kayak like you wouldn't believe. I LOVE that I can space this out. If I had the room and the inclination I feel I could put a 17 footer on this rack.It's so easy to build. It's so nice when it's built. I really like it. Once you build one the second builds even faster. I've had no issues being able to move what I need moved around. I do wish a little bit that I could buy maybe one more stand instead of two. That way I would feel very confident in putting a 22' surf ski on it.But as it is, fantastic.The cons...well if I had to put the largest hobie fishing yak on there, I'd say this is not the rack to buy for that. I think it would fit a Hobie Revolution 13' ok, but any wider than that and you're probably pushing it.As far as the racking goes, I put the J hooks at the top on the highest I could go. And then dropped the bottom J hooks to just above the floor. Without looking I think maybe the second peg hole from the bottom. There's plenty of room for your average yak to go underneath.Materials: Construction looks good. I think the rack itself could stand some sun and rain. I'm unsure about the screws however. They are coated so it's a fair shot that they'd last a fair bit in the sun and rain. I'm not leaving it outside so I can't speak to that. Speaking of outside. If I was going to put these racks outside I'd want to ensure the bottom of the rack sat on some level surface. Maybe put some paving stones down and if your area is windy, I'd consider bolting it down.Great purchase overall and very pleased.

Needed a rack to hold wider, heavier kayaks. This holds the Crescent LiteTackle II on the bottom and the Crescent CK1 on top easily. They are 75 lbs and 60 lbs respectively. The padded arms are nice and the straps keep the kayaks safely in place. Assembly was very easy and clear instructions were included. You can leave them freestanding (we choose to) or they include hardware to mount into the floor as well. We feel optimistic this will hold up over the long term. So far we are very pleased with the purchase and glad we chose this over cheaper models we were considering.

easy to assemble and provides a great cradle for 2 single ocean kayaks.rugged and reliable long term rack for kayaks

Very easy to assemble and extremely sturdy. Excellent product

Having finally taken the plunge to get two lovely brand new P&H Scorpio sea kayaks we needed some good storage. Unfortunately, no shed space currently so it wax going to have to be outdoors.After doing quite a bit of research we finally took the plunge and got this. Quite honestly, we haven’t looked back. It’s extremely well made and solid, fits together without any issues and even the supplied tools are so good I’ve actually kept them with my main toolkit.It’s a very nice bit of kit and well worth the money. It’s pretty steep, but it’s cheaper than repairing damage to the kayaks and the expensive is very evident in the design and build quality.I almost never given anything 5 stars as it basically has to be flawless. This is.

So simple to assemble! Very sturdy and well built. Will be buying a second one for sure!

I've purchased products from this manufacturer before. I bought the wall version when I lived in a different house. This time I wanted something freestanding as my garage is made of brick and I may want the kayaks in a different spot a some point. They are not cheap but are well worth the extra money. They are easy to assemble and very sturdy. Because the two stands are independent of one another, it is easy to space them fir your needs. Great product.