3-Piece Hand Seamers Sheet Metal Tools, Sheet metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool with Tool Box Storage

These are pretty nice on the fly sheet metal benders for use in a shop or HVAC on site when you need to fix a problem without a trip back to the shop for a custom break bend. These are cheap brand names of more expensive tools but for the average Joe like myself that won't use these everyday this is just the answer. I toss these in the tool box and have them all the time at all the jobs and if they get a little beat up so what as long as they work when needed that's all I'm looking for. Overall if you need to tweak a piece of ducting here or there this will do the job and save a lot of time and money and I would recommend these however, if you plan on using them daily you might want to look at the big brand names. My opinion these are decent tools for the money and worth a second look if you need some hand held gauge sheet metal benders.

Broke the first time I tried to bend meatl on roof ridge just to lay other side of roof won’t even seaming the ridge yet

Nice set, Very sturdy thick metal. case is padded and almost alittle bigger then it needs to be however these work great for getting a good flat purchase on tin and other thin metals. i recently used these to help form some patchs on my truck or even just pinch to egdes and they worked flawless

Pros:1. The handles are wider than your typical set of pliers, so they don't cut into your palm when you're really getting after it.2. The jaws are substantial, and the acute corners of said jaws would let you get into the interior corners of boxes and such.3. The carrying case is way over the top in terms of what you'd need for tools like these. Super nice case.The cons:1. the grind of the jaws are all over the map. One (the 90 deg seamer) has the ends ground flush, but somehow the line of contact between the jaws is really irregular. The 45 degree seamer has jaws that weren't ground at all, and you can see the casting seam on the edge. The straight seamers jaws that were cleaned up on one side and not on the other.2. the lap joint of the straight seamers was ground a little bit too deep, leading to the jaws to be a bit offset.3. each set has jaws that curve away from eachother at the corners, and I could believe that's a feature if they were a consistent and symmetrical curve, but they are not.Bottom line:These will do the job they were intended to do, and be fairly comfortable in the hands while doing so, but the irregularities in the jaw geometry would make totally perfect crisp folds unlikely without further modification.

These are a nice heavy duty set of duck bill pliers. They are a nice quality set and make the job easier. It's nice having the 3 different angles on the jaws

I grabbed this set because I don't own a press-brake, and to be perfectly honest, most of the jobs I need these for are smaller in scale. The grips and handles are adequate and allow you plenty of torque. The 3 angle options are nice so you don't have to yank over more than you can in tight spaces. This is for smaller jobs, don't expect to bend panel that you'll be plug welding an entire bed-rail for - though if you had enough patience and a few body hammers and dollies, you might pull it off.

I expected a decent set of sheet metal pliers and was pleasantly surprised by how well built these are. They are not going to break or wear out easily. I don’t do a lot of sheet metal work or much metal roofing but a few times a year I find myself in desperate need of the right tool for the job while putting together a small roof or completing a repair. This set will take care of what I need and more

Received item in good condition - fast shippingItem came in undamaged very nice storage box,Cleaned off small amount of oil and no rust - nice,Red grippy padded handles feel nice and don't easily slide off,All 3 of the tools have a good alignment and don't feel sloppy at all, quality appears good,Under some stress all 3 tools seam to hold up well,Will update if any problems come up,