MZS Gold Motorcycle Brake Clutch Levers Short Adjustable Compatible with FZ07 MT07 14-21 | FZ09 MT09 FJ09 13-20 | FZ1 06-15 | FZ6 04-10 | FZ6R 09-17 | FZ8 10-16 | Tenere 700 19-21 | XSR 700 900 16-21

It's been about 5 months with these and I dig then but wish the adjustments were a little more but over all good for my 600

Great, love them on my bike.

The media could not be loaded.  First off these fit my 2022 Kawasaki z900 ABS amazingly.They have a much smoother pull and feel like they are more stable. I've got larger hands and these don't get blocked by my other knuckles when i use them unlike the stock ones that came with the bike.Lots of people have commented on the looseness of the mechanisms when using the stock mounts which is a thing however it is minor in movement and still worlds better than the stock. It looks like they were made with AT MOST a 64th gap to allow easy swap with the stock set up. The washers provided are too thick to be used to try and tighten up the gap.When replacing the clutch, i found the instructions not very useful. I took the entire housing apart and just used my head for working it out. I'll say it is easier than you think. Don't worry about the spring with the stock set up.The brake was even easier and doesn't interfere with my throttle lock at all.The video i uploaded is showing the wiggle people were talking about (not very easy to show on camera because of how little it moved. ) And the location dropping all the way to the lowest. I believe the lever location is due to not being set in the correct location so it's half locked and half out. I had a hard time recreating it multiple times.Final tips for 2022 z900 install: keep your hands under the bushing. It likes to fall. You will likely need to remove the all screws holding the entire clutch assembly to the bars. The nut is not very accessible without rotating it. Also the screws like to cross thread so be gentle.

These levers were initially recommended to me by a KTM 390 Duke forum member. After a few messages with the seller, I pulled the trigger. These levers fit perfectly! They come with shims for if the levers are loose. Mine were not. Nice two finger brake/clutch application. No contact with switch housings and all functions work normally. Just remember to remove the clutch switch, held in by two little screws before removing the clutch lever and after installing the new clutch lever.

BEAUTYFULL

Fit my 22’ GSXS 750 perfectly. Would buy again and recommend. Plus it fits the lines of the bike.

The fit and finish is far better than I expected. Please lube when installing people. This is standard with any lever. So glad I didn't listen to the hype followers and flex spenders just to pay more money on big brand levers that are the same quality. Honestly I don't see how another lever could be any better.

This product fails overall for me. This was listed as compatible with my specific model but the clutch lever goes to a completely different motorcycle.The brake lever works okay. If I Adjust it all the way out sometimes the adjustment will slip off the perch.Not a fan. Will be replacing these.

I have been riding with these for around month now. And haven't had a single issue, so far I am extremely happy with the functionality of this, the length adjustments work really well, and no hassles with install, I have put them on my 2020 R3.Amazing product for a price. Just going to wait and see how the dyed metal hold up in the sun 😄

Great quality and easy to install. Cleans up the look of the bike quite a bit compared to the stock levers. Very happy with the quality for the price

Outside of receiving them in the original unsealed box, guess I missed something when ordering, everything was there and there was no damage. There's a few good instruction videos on Youtube that I looked at before attempting. Just search something like brake clutch shorty lever installation for your model and something should come up. Installation was easy but extra care needs to be taken with the clutch lever. I'd recommend not using a socket as it can break the electrical switch. I used a wrench instead. It took longer but I didn't break the switch or the white plastic switch peg that the lever actuates. I also marked and measured the OEM lever for clutch cable slack, before I removed it, and set the new one to that with no issue. IMO, they look better and seem easier to use.

The washer was missing inside the box, so I contacted the seller. Not only did they help me, they did so in a matter of hours. They followed up with many solutions, pictures, how to guides and much more. Above and beyond quality service.Product in itself is good quality. Don’t be mistaken, it’s not cheap stuff.

Great levers had them in black and red on my kawi and now gold and black on my yammi .Great quality and fitment . No issuesLooks better than some other top end brands in my opinion. 5 star