Auto Ventshade [AVS] Bugflector Hood Shield / Protector | Fits 2019 - 2025 Chevrolet Silverado 1500, 2022 LTD, (Excludes 22 - 24 ZR2, L) | High Profile Bug Deflector - 1 pc., Dark Smoke | 23956

Fit to specs. Installation easy. The finish of mat black which matches to OEM plastic molding perfect

Excellent price. Make my truck looks pretty. Many persons ask where I bought it. Wind resistense, good adhesion and excellent quality.

This product it is NOT as advertised and NOT fitting correctly👎. I was hesitant to buy it in the first place and ordered one in the end, but AS MANY buyers stated her it is NOT a correct fit due to its designed style/model that have not only a flimsy screws that would not fit but also not strong enough to hold in place while some important ones are plastic, and these 2 metal clips that comes in this package it is not going to do that job either since there is a hard glue or perhaps some hard rubber that seal the hood connecting in place and that portion under the front hood makes it almost impossible to attached these clips since these are somehow short and not holding most likely I would assume, where the plastic bug reflector supposedly hold. The other 4 extended holes already drilled into the big reflector are so far away that you would need to improvise something, perhaps an extended metal so that you can attached the bug reflector to the hood somehow and hold it in place at some shape or form, otherwise the exterior or extremities of the 2 hold metal clips will NOT do the job most definitely and the whole plastic bud reflector could and would I would assume for sure flip or touch your hood making scratches and/or scuffs all over that covered portion of your hood while you drive on a highway, guaranteed since the whole thing it is not secured correctly in place. I am thinking of returning immediately, since it for NOT appear to be reliable, and then even similar like some of the photos attached by other buyers while these ones look a little different. Not sure if the securing hole or system that comes with such models are totally different while there is no photos showing any of that, but I would assume were a little better since some of these people appears to install these big reflectors in place and are happy with the whole thing. Not the case in my situation like numerous negative reviews posted for this flimsy unreliable designed that I got and which is a different shape vs the other photos attached, regrettably. You definitely need to improvises something and make it work, but that will be an extra costa me headache since that will not only look ugly and a mess job, but also hard to get it done nicely and neatly in the end. Also NOT sure if you can close the hood nicely after that since you add things that should NOT be there and perhaps touch the plastic interior or the top engine bay perhaps making it harder to close the hood I would assume too, let alone the exterior appeared of a raised hood in case you will increase the tolerance of making it work while closing the hood and the the hood would look off as being closed in place. Not happy about any of these potential issues that should have been thought carefully prior to design an item that is not correctly labeled as fit, not to mention about some extra hardwares that could be necessary since the whole dam thing it is not fitting the holes of the hood or even being close to the right place… I would NOT recommend this product unless you want o desperately making it work and look awful in the end.👎

I chose this hood deflector because I didn’t want another rock dent/chip on my hood, plus it looks nice.Perfect fit for the 2021 Silverado.There are some videos out there to watch from actual people who have this setup,While installing the led lights, I did like most of the videos and re-routed the wire to the passenger side, instead of the drivers side, by drilling a small hole on the passenger side of the protector, instead of using the driver side hole that is provided from the factory. The battery and fuse box on the 2021 Silverado is on the passenger side. That made a cleaner install though the hood’s cavity. With no excess wire visible on the underside of the hood. Used a stiffer piece of wire to fish it through the holes under the hood.I had to drill a small hole in the fuse box top cover for the connection to the parking light fuse using asmall fuse tap that is also available on Amazon.You will get some hood vibrations above 80 mph but that’s no a game changer for me.

I do like the looks and the durability of the hood guard. The added running lights are cool as well.What I didn't like was the lights come rolled up and they kink when unrolling, not a big deal but you can see the kink when installed. I also didn't like sticking it to my hood. If you wanted to remove it for any reason good luck! Lastly because of the ledge the lights set in the wind going down the interstate looks like your hood is going to fly open. It makes the hood move a lot. Over all its a good piece of equipment. I'm just a little picky.

Works great for keeping chips from happening and looks great at night light up

Would but it again

It's hard putting the 4 clips in.